GlassGuardWindow FilmCall 905-330-3802Get a free quote

Maintenance · · Updated · 2 min read

Window Film Maintenance: How to Clean and Care for Your Film

How to clean window film and what to avoid: when to wait after install, which cleaners and tools are safe, and what is normal while it cures.

By Ryan DiRisio, founder of GlassGuard Window Film

Window film needs very little care, but the wrong tool can scratch it in seconds. These habits keep it clear for its full life.

Right after installation

Film is applied wet and needs time to cure. During that time you may see small water pockets or a slight haze; they clear as the film dries. Do not press on them and do not clean the filmed side until the cure time you were given has passed. It is longer in cold or cloudy weather.

Cleaning

  • Use a soft, clean cloth, a soft sponge or a clean rubber squeegee.
  • Use mild soapy water or a cleaner the film maker approves. Many recommend avoiding ammonia-based glass cleaners on film.
  • Wipe gently; do not scrub.
  • Dry with a clean, lint-free cloth.

Avoid

  • Razor blades, scrapers, abrasive pads and gritty cloths.
  • Abrasive or harsh cleaning products.
  • Tape, suction cups and stickers on the filmed side.
  • Hanging things where they rub against the film.

When to call

Peeling edges, bubbles that appear long after installation, or cloudiness that does not clear are worth reporting to whoever installed the film. Keep the data sheet and the manufacturer's warranty terms you were given with the quote.

Related: installation myths.

Questions about caring for your film? Call 905-330-3802 or get a free quote, and we will look at the glass with you.

Next step

Get a free quote for your glass.

We measure on site, check the glass and show samples on your own windows. Call, or send a few photos and we will come back to you.

Call

905-330-3802