GlassGuardWindow FilmCall 905-330-3802Get a free quote

Education · · Updated · 2 min read

7 Window Film Installation Myths, Debunked

From bubbling to peeling, window film has an outdated reputation. What causes the problems people remember, and what to ask an installer.

By Ryan DiRisio, founder of GlassGuard Window Film

A lot of what people believe about window film comes from old car tint and do-it-yourself kits. Architectural film, installed properly, is a different product. Here are common myths, and what is actually true.

"Film always bubbles"

Film is applied wet. For a while after installation you may see small water pockets or a slight haze; they dry out as the film cures. Cure time depends on the film and the weather. Bubbles that stay, or that contain dust, point to poor preparation or a damaged film, not to film in general.

"It will make the room dark"

Films range from nearly clear to dark. Many solar films are chosen precisely because they cut heat and glare while letting most of the daylight through. Look at the visible light transmission on the data sheet, and look at a sample on your own glass.

"It only lasts a season"

Architectural films are made for years of service. How long a particular film lasts depends on the product, which way the glass faces and whether it is inside or outside. The manufacturer publishes the expected life and warranty for each film, and those are the numbers to rely on.

"All film is the same"

Dyed, metallised, ceramic, low-e, safety and security films are built differently and do different jobs. See how the main solar film types differ.

"Film can go on any glass"

Not always. Some films on some glass, for example large tinted or insulated panes in strong sun, can raise the risk of thermal stress cracking. Film makers publish film-to-glass guidelines for this reason. A good installer checks the glass before recommending a film.

"Once it is on, it is permanent"

Film is designed to stay, but it can be professionally removed. That is useful for decorative film after a rebrand, or for replacing an old film that has failed.

Related: questions to ask an installer.

Questions about film on your windows? Call 905-330-3802 or get a free quote, and we will look at the glass with you.

Next step

Get a free quote for your glass.

We measure on site, check the glass and show samples on your own windows. Call, or send a few photos and we will come back to you.

Call

905-330-3802