GlassGuardWindow FilmCall 905-330-3802Get a free quote

Education · · Updated · 2 min read

Ceramic vs. Dyed vs. Metalized Film: Which Is Right for You?

Dyed, metallised and ceramic solar films are built differently. How each handles heat, glare, appearance and signals, and how to compare them.

By Ryan DiRisio, founder of GlassGuard Window Film

Solar control films reach their results in different ways, and that explains much of the difference in price and appearance. Here are the main constructions in plain terms.

Dyed

Dye in the film absorbs part of the sunlight. Dyed films reduce glare and give a tinted look, but absorb more heat than they reflect, so heat rejection is usually modest. Some dyes can fade over time.

Metallised

A very thin metal layer reflects part of the sun's energy. Metallised films can reject a lot of heat, and many look reflective from outside. Because they contain metal, they can reduce mobile phone and wireless signals through the glass, which matters in some buildings.

Ceramic

Ceramic (often nano-ceramic) films use non-metal particles that reject infrared heat while staying fairly clear. They do not interfere with signals and usually have low reflectance. They tend to cost more.

Other types you will see

  • Hybrid films combine dye and metal to balance appearance and performance.
  • Spectrally selective films aim to let visible light through while rejecting infrared.
  • Low-e films add winter benefit by reflecting room heat back inside. See film in winter.

How to compare

Use the data sheet, not the label. Compare visible light transmission (daylight), total solar energy rejected or solar heat gain coefficient (heat), UV rejection, interior and exterior reflectance (appearance), and the warranty. Then look at samples on your own glass, and check the film is approved for your glass type.

See solar film.

Questions about which film suits your glass? Call 905-330-3802 or get a free quote, and we will look at the glass with you.

Next step

Get a free quote for your glass.

We measure on site, check the glass and show samples on your own windows. Call, or send a few photos and we will come back to you.

Call

905-330-3802